Inverter 1000W buzzer buzzes and fault light on after power-on after starting
Model
BP Series Pure Sine Wave Inverter 36VDC 220VAC 1000W
Description
1. The buzzer buzzes and fault light on after power-on after starting.
2. Input battery voltage is normal.
Analysis of the possibility of the cause
1.Confirmed that the front driver board failure caused false alarms by checking.
2. Front Mosfet damaged.
3. The internal circuit board is dusty and dirty, causing damage to the front board and Mosfet.
Solutions and steps
If the use environment is bad, it is recommended that customers clean up the dust inside the machine regularly.
Related Articles
The 2000W inverter buzzer buzzes at intervals but the fault light is off
Model BP Series Pure Sine Wave Inverter 24VDC 220VAC 2000W Description 1. After the inverter is turned on, the working light is on, the fault light is off, there is no output voltage, and the buzzer buzzes at intervals. 2. Detect that the input ...
300W Inverter direct alarm and fault light on at power on
Model BP series pure sine wave inverter 300W 48VDC 220VAC Description Alarm directly when starting, the fault light is on, and the buzzer sounds. Analysis of the possibility of the cause Checking the circuit board, it was found that the problem was ...
6000W inverter buzzer buzzes without output after startup
Model BP series pure sine wave inverter 6000W 12VDC 220VAC Description After startup, there is no output, the fault light is on, and the buzzer buzzes. Analysis of the possibility of the cause After opening the cover for inspection, it was determined ...
4000 watt inverter working light and fault light on but no output after power on
Model BP series pure sine wave inverter 4000W 24VDC 220VAC Description No output, working light on, fault light on, buzzer sounding after power on. Analysis of the possibility of the cause Open the cover and check the internal components, 2 MOS tubes ...
BP 300W inverter fault light does not light up after power on but no output voltage
Model BP series pure sine wave inverter 300W 24VDC 220VAC Description Turn on normally, the fault light is off, but there is no output voltage. Analysis of the possibility of the cause After checking and replacing, it is determined that the rear ...