The inverter's buzzer keeps buzzing after being struck by lightning
Model
BP series pure sine wave inverter 4000W 48VDC 110VAC
Description
The inverter is normal after being struck by lightning, but its buzzer keeps buzzing.
Analysis of the possibility of the cause
1. N3/R43 is damaged.
2. breakover/short circuit.
Solutions and steps:
1. Change U3, N6 parts.
2. Or remove the buzzer.
Related Articles
Inverter 1000W buzzer buzzes and fault light on after power-on after starting
Model BP Series Pure Sine Wave Inverter 36VDC 220VAC 1000W Description 1. The buzzer buzzes and fault light on after power-on after starting. 2. Input battery voltage is normal. Analysis of the possibility of the cause 1.Confirmed that the front ...
The 2000W inverter buzzer buzzes at intervals but the fault light is off
Model BP Series Pure Sine Wave Inverter 24VDC 220VAC 2000W Description 1. After the inverter is turned on, the working light is on, the fault light is off, there is no output voltage, and the buzzer buzzes at intervals. 2. Detect that the input ...
6000W inverter buzzer buzzes without output after startup
Model BP series pure sine wave inverter 6000W 12VDC 220VAC Description After startup, there is no output, the fault light is on, and the buzzer buzzes. Analysis of the possibility of the cause After opening the cover for inspection, it was determined ...
BP3000W inverter on after the fault light flashes buzzer sound
Model BP series pure sine wave inverter 3000W 12VDC 110VAC Description After power on, the fault light flashedand buzzer sounded, and it could not work normally. Analysis of the possibility of the cause 1. Check the internal circuit to confirm that ...
The fault light is on and the buzzer sounds after the 300W inverter is turned on
Model BP series pure sine wave inverter 300W 24VDC 220VAC Description After power on, the fault light is on, the buzzer sounds, and there is no output voltage. Analysis of the possibility of the cause 1. Check the internal components, the front and ...